Rich color, even application, and clear coverage near the cuticle — the result depends on both the properties of the gel polish and the technique of the master. Pigmented materials help to achieve a distinct shade in thin layers, but require careful control of the amount of product.
We'll look at how to apply gel polish to a brush, distribute it over the nail, and what to pay attention to during polymerization.
Pigmentation and layer thickness are different things
High pigmentation means the material is rich in color. It does not mean that the gel polish needs to be applied in a thick, voluminous layer.
Do not try to cover the nail with a large amount of product in one pass. Excessive thickness makes it difficult to polymerize evenly: the coating may wrinkle or remain insufficiently hardened inside.
Focus on thin, even application and the number of coats recommended by the manufacturer. If the color is not completely uniform after the first coat, do not rush to add material to individual areas - evaluate the result after the next thin coat.
Gather material gradually
Before applying, tap the brush against the inside edge of the neck to remove any excess gel polish. The bristles should have a controlled amount of product that is easy to spread without dripping.
Start with a small amount and add more as needed. If material builds up near the side rollers or the free edge, use a smaller amount next time.
Adjust the amount of product to the length and width of the nail plate. The same set of brushes will not be equally convenient for short and long nails.
Distribute color without excessive pressure
Position the brush slightly away from the cuticle, carefully bring the material closer and spread it to the free edge. Work smoothly, avoiding hard pressure, which can leave grooves and remove color from already coated areas.
The first layer should create an even, thin base. The second layer should add depth and uniformity to the color. Cure each layer separately according to the instructions.
If you are using a thin brush to draw near the cuticle, use minimal product. Precision is more important than getting the color as close to the skin as possible.
Consider the texture of the gel polish
YOU ARE CUTE gel polishes are pigmented, have an oily texture, are easy to spread and do not flow. This helps to control the material during application and work carefully near the cuticle and side rollers.
To take advantage of these properties, keep the layer thin and brush set moderately. Even a comfortable consistency requires controlled product quantity and careful technique.
Follow the polymerization recommendations.
Determine the polymerization time according to the instructions for the specific gel polish. Do not shorten it just because the surface already looks hard: the appearance does not confirm the complete hardening of the material.
Before work, check:
- Does the lamp meet the requirements of the material manufacturer?
- what polymerization time is recommended for this product;
- whether the client places her hand in the lamp correctly;
- whether there is excessive thickening of the color in certain areas.
If necessary, cure the nail polish on your thumbs separately, placing them evenly in the lamp. Do not compensate for a layer that is too thick by arbitrarily increasing the time - adjust the application.
Check the coating before the lamp
Before curing, inspect the cuticle area, sides and free edge. Remove any excess and ensure that no material has come into contact with the skin. If this has happened, remove it completely from the skin before curing.
Three things are important for uniform color: controlled application on the brush, thin layers, and polymerization according to the manufacturer's recommendations. And the pigmented, oily texture of YOU ARE CUTE gel polishes will help make application convenient and precise.
Working with highly pigmented gel polishes requires control over product quantity and coat thickness, along with adherence to the manufacturer’s curing instructions. High pigmentation helps deliver rich colour, but does not mean the product should be applied in a thick coat.
For even coverage, load your brush with small amounts of gel polish and distribute it using smooth movements without excessive pressure. Control the amount of product around the cuticle, sidewalls and free edge. Cure each coat separately according to the instructions for the specific product.
YOU ARE CUTE gel polishes are highly pigmented, have a smooth, oil-like texture, spread easily and stay in place without running. This consistency helps nail technicians control application and create a neat finish around the cuticle.
Before curing, check that the coat is even and that no product is touching the skin. Use a lamp that meets the manufacturer’s requirements and follow the recommended curing time. Thin coats and careful application help create an even colour finish.