Rubber Base gel polish base

RUBBER BASE is a transparent, universal base for coating.

Features:

• It has an acidity of 3–4 pH.
• Minimal shrinkage is possible during wear due to the elasticity of the base.
• May cause a feeling of warmth and burning on injured and very thin nails (not on healthy nails).
• Can be used as a base for all types of coatings and for extensions on gel tips.
• The consistency is medium, self-leveling.
• The lamp power for drying the base is 36–48 W. The lamp must be original.
• Provides flaking-free wear for 3–4 weeks.
• It is perfectly removed both by sawing and using liquid.
• Hypoallergenic and has a neutral odor.

Application method:

1. Withdrawal.
2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.
3. Use a 220-grit file to file the nail without applying strong pressure from above, lifting the scales of the nail plate, or use a 100-grit buff.
4. Let's do a manicure.
5. If we work with removers, we wash our hands with soap after working with them.
6. Degrease the nail with Nail Prep. Do two approaches. Use 4 wipes for this (1 wipe for 5 fingers). First approach: wipe the surface of the nail. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and in the sinuses.
7. We use a primer if desired, but if the base for the substrate has sufficient acidity, then it is not needed.
8. The Rubber Base is best applied with a flat gel brush. The movements should be rubbing. We draw all the sinuses of the nail and dry in the lamp for 60 seconds.
9. We recommend not removing the tackiness from the base coat, as it helps chemically bond with subsequent layers of coating (gel, color, base coat). Removing the tacky layer weakens the chemical adhesion and there is a risk of peeling.
10. Level with Rubber Base. Cure in the lamp for 90 seconds.
11. File the shape after it has been smoothed out. This is necessary so that a thickness forms on the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to cut 1 mm of the natural nail from the inside. In this case, there will be no peeling of the material. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, we erase the stickiness and cover with a thin layer of gel polish or camouflage base.
14. Cover with top coat. Dry for 120 seconds. After drying, do not wipe with anything, as the shine may be lost.

Ingredients: Polyacrylic Acid, Hema, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica
May Contain: CI 45380, CI 15850, CI 77491, CI 15985, CI 77492, CI 77007, CI 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 77000

TPO FREE
(Product photos on the website may differ from the actual product)